RING SIZING & RESIZING
RING SIZING & RESIZING
‘’Ring Sizing and Resizing’’ What a wonderful confusion is this. Many of the people think that ring sizing and resizing are same process, But it’s not. These things processes are very near by same, But some of the difference are held there. Let us know the processes briefly…
RING SIZING
The process of ring sizing is the process which is doing before purchasing of finger ring. Before purchasing this process have to be done for reduce future cost of ring sizing. Many of the people Unknowingly or in confusion purchase made, that lead to future unwanted cost.
Let we understand how we can figure out the size of ring finger.
To determine your ring size using tools like string, paper strips, or printable sizing guides. It can also include quick tips for accuracy (like measuring at accounting for knuckle size) and a simple chart to reference. A call-to-action can direct readers to your store's ring size chart.
RING RESIZING
Ring resizing is a process adjustment in circumference that can be fit to your finger comfortably. This process is can be differ from conditions whether size up and size down to make it larger or smaller.
RING SIZING UP: The jeweler cuts the band, adds a matching metal piece, solders it in place, then files, polishes, and re-finishes the ring (re-plating if needed).
Preconditions :
1. Use only simple bands.
2. Jewelers use tools for sizing up.
3. This process is too quick but is not suitable to all type of rings.
RING SIZING DOWN: The jewellers cut the band, cut down the metal and solder that to each part reshape, polish.
Preconditions :
1. Designer bands cannot said that perfect resized.
2. Jewellers cut into two pieces then other two notch meets and solder.
3. This process is also quick but may be slightly differ from original.
International Conversion Table
|
US Ring Sizes |
UK Ring Sizes |
Diameter mm |
Circumference mm |
|
3 |
F 1/2 |
14 mm |
44 mm |
|
3.5 |
G 1/2 |
14.5 mm |
45.5 mm |
|
4 |
H 1/2 |
14.9 mm |
47 mm |
|
4.5 |
I 1/2 |
15.3 mm |
48 mm |
|
5 |
J 1/2 |
15.6 mm |
49 mm |
|
5.5 |
K 1/2 |
16 mm |
51 mm |
|
6 |
L 1/2 |
16.5 mm |
52 mm |
|
6.5 |
M 1/2 |
16.9 mm |
53 mm |
|
7 |
N 1/2 |
17.2 mm |
54 mm |
|
7.5 |
O 1/2 |
17.7 mm |
55.5 mm |
|
8 |
P 1/2 |
18.2 mm |
57 mm |
|
8.5 |
Q 1/2 |
18.5 mm |
58 mm |
|
9 |
R 1/2 |
19 mm |
59.5 mm |
|
9.5 |
S 1/2 |
19.4 mm |
61 mm |
|
10 |
T 1/2 |
19.8 mm |
62 mm |
|
10.5 |
U 1/2 |
20 mm |
63 mm |
|
11 |
V 1/2 |
20.6 mm |
64.5 mm |
|
11.5 |
W 1/2 |
21 mm |
66 mm |
|
12 |
X 1/2 |
21.3 mm |
67 mm |
|
12.5 |
Z |
21.6 mm |
68 mm |
|
13 |
Z 1/2 |
22.3 mm |
70 mm |
|
13.5 |
Z + |
22.6 mm |
71 mm |